Skip to main content

ENDEAVOUR TACTICAL / TECHNOLOGY GUIDE

EXOSENS.
THE TECHNOLOGY
BEHIND THE VIEW.

Understand the image intensifier at the heart of your night vision. Explore XR5, ECHO, ECHO+, 4G, 4G+, ECHO14 and ECHO+ 14.

Known to many users as Photonis, Exosens produces the image intensifiers that turn faint available light into a usable night-time image. This guide brings the technology and our tube options together in one place.

01 / FROM LIGHT TO IMAGE

What happens inside?

An image intensifier amplifies available light. The objective lens gathers the scene; three key stages inside the tube produce the image you see through the eyepiece.

01

Photocathode

Incoming photons release electrons from a light-sensitive surface. Its sensitivity across different wavelengths helps determine how effectively the tube uses the light available.

02

Microchannel plate

An electrical field draws electrons into microscopic channels. Collisions with the channel walls release more electrons, creating a cascade that amplifies the original signal.

03

Phosphor screen

The multiplied electrons strike a phosphor layer, which converts them back into visible light. The output image is viewed through the device’s eyepiece.

This is light amplification rather than thermal imaging. In complete darkness, an intensifier needs an additional light source, such as an appropriate infrared illuminator.

02 / THE TECHNOLOGY IN PRACTICE

More than a brighter image.

Auto-gating

The tube’s power supply rapidly controls its operation as illumination changes. This helps preserve useful detail when a dark scene includes bright lights or when lighting changes suddenly. XR5 incorporates auto-gating; ECHO and the 4G families offer fast or very fast auto-gating according to grade.

Extended spectral response

Exosens specifies a 350–1064 nm spectral range for 4G and 4G+. This reaches beyond human vision into near-infrared, allowing the tube to use light your eyes cannot see. Sensitivity varies across that range; it is not equally strong at every wavelength.

Detail around light sources

Halo is the glow surrounding a bright point of light. A smaller halo can leave more of the surrounding scene visible. ECHO and 4G+ literature highlights small halo performance alongside auto-gating; assess the exact tube specification rather than assuming every grade is identical.

Green or white phosphor

P43 produces a green image; P45 produces a white/grey image. Colour preference and viewing comfort matter, but white phosphor alone does not establish a higher performance grade. Compare the measured specification of the actual tubes.

Auto-gating does not make a tube immune to bright-light damage. Follow the device’s operating instructions and keep protective caps fitted when appropriate.

03 / YOUR TUBE OPTIONS

Compare the Exosens range.

The names identify different product families and performance selections. The table distinguishes manufacturer reference values from the configurations advertised in our catalogue.

Swipe across the table to see all columns.

FOM reference points — read the specification notes below
Tube optionFOM referenceWhat it offers
XR51472 minimum / 1600 typical*Established auto-gated technology for varied lighting.
ECHO141400–1800An accessible starting point in the commercial range.
ECHO+ 14 / ECHO14+1800–2200 in our listed configurationsA higher FOM selection in our ECHO14-labelled device range.
ECHO1800–2200 current manufacturer reference*Commercial performance balancing image quality and cost.
ECHO+2200 minimum*A higher FOM commercial selection.
4G1800 minimum / 2100 typical*Military-focused specifications with extended spectral response.
4G+2300 minimum*Higher minimum SNR and resolution within the 4G family.

*XR5, ECHO, ECHO+, 4G and 4G+ manufacturer figures shown here refer to the published 18 mm P43 reference specifications. Confirm the specification for the required format and phosphor. ECHO+ figures are from the manufacturer’s 2024 ECHO leaflet. Our catalogue also includes earlier ECHO selections labelled 1600–2000 or 2000+ FOM: the individual listing and supplied tube data take precedence over a general family guide.

XR5

An established Exosens tube family with an integrated auto-gated power supply. The published reference includes 23 minimum SNR and 64 lp/mm minimum resolution. It offers a practical introduction to auto-gated night vision without assuming a newer family is necessary for every requirement.

ECHO & ECHO+

The commercial range combines auto-gating with a choice of performance selections. ECHO+ raises the published FOM threshold above ECHO. A high-FOM ECHO selection should still be assessed on its full data sheet; a matching FOM number does not establish that it meets every requirement of 4G or 4G+.

ECHO14 & ECHO+ 14

Our Argus panoramic listings include ECHO14 at 1400–1800 FOM and ECHO14+ at 1800–2200 FOM, with 16 mm configurations. “ECHO+ 14” is presented here alongside our catalogue spelling “ECHO14+”. These are listing-specific options, not a claim that every ECHO14 tube has the same format. Check the exact device and tube combination.

4G & 4G+

4G specifies at least 28 SNR and 64 lp/mm in its published reference; 4G+ raises those minimums to 30 SNR and 72 lp/mm. Both specify at least 55 lp/mm high-light resolution at 200 lux. These additional parameters help explain why matching FOM alone is not enough to equate different tube families.

04 / READ THE DATA, NOT JUST THE NAME

What the numbers mean.

FOM = SNR × resolutionFor example: 30 × 72 lp/mm = 2160 FOM

FOM combines two measurements. It is a useful comparison point, but different combinations can give a similar result. For a purchase decision, ask to review the full tube data and the complete device configuration.

SNR

Signal-to-noise ratio describes useful image signal relative to noise. Under comparable test conditions, a higher value generally supports a cleaner low-light image.

Resolution

Measured in line pairs per millimetre, this describes the tube’s ability to resolve fine detail. The lenses, focus and available light also affect the detail you actually see.

Gain

Gain describes amplification. Manual gain control allows brightness adjustment only where both the tube and housing support it; auto-gating does not automatically mean manual gain is available.

Before choosing your configuration

Review the tube data sheet, phosphor, format, gain-control compatibility and cosmetic spot information. For binoculars, discuss how the pair is matched. Confirm the device’s optics, housing, warranty and current availability alongside its tube grade.

05 / BUILD THE RIGHT SYSTEM

Choose with the complete picture.

Tell us your budget, preferred device and the conditions in which you expect to use it. We can discuss the available Exosens options and the specification of the proposed configuration.

Manufacturer references & specification notes

This guide covers the tube families offered by Endeavour Tactical, rather than every product in the Exosens portfolio. Reference information checked November 2026. Manufacturer specifications and product selections may change; request the data for the exact tube being supplied.

ECHO14+ references follow our Argus GPNVG ECHO14+ white phosphor listing. This designation is not assigned a separate universal manufacturer specification in this guide.

Endeavour Tactical

Choose your kit with confidence.

Buying advice, compatibility and support from Endeavour Tactical.